Bronze CuAl AMPCO18®
Business Unit Manager Medical, Aerospace, Industry
Compact grain structure and high physical properties result from proper phase distribution and hot working of AMPCO® 18 during the extrusion process. These qualities enable this alloy to perform successfully in an extremely wide range of difficult applications. It is an excellent bearing material characterized by good resistance to wear and fatigue. AMPCO® 18 rod is produced with a good surface finish to commercial tolerances and can be used economically for volume-production applications. AMPCO® 18 is ideally suited where high strength and hardness combined with wear and fatigue resistance are required. Some of the more common applications of this alloy are bushings, bearings, gears, worm wheels, valve seats and guides, hydraulic valve parts, pump rods, guide pin bushings, gibs and slides, etc
AMPCO® 18 is used mainly in:
- Plastics Tooling & Mold Making
- Steel Mills
- Tube Bending
- Tube Forming
- Wear & Corrosion Resistance
- Watch cases
Chemical composition of AMPCO® 18
| Al % | Fe % | Others % | Cu |
|---|---|---|---|
| 10,5 | 3,5 | 0,5 | Balance |
Mechanical properties of AMPCO® 18
| Property | Commercial Bronze | AMPCO® 18 |
|---|---|---|
| Tensile Strength KSI(Mpa) | 85 (586) | 95 (655) |
| Yield Strength KSI(Mpa) | 32 (220) | 38 (282) |
| Elongation % | 12 | 16 |
| Shear Strength KSI(Mpa) | 47 (324) | 58 (400) |
| Fatigue KSI(Mpa) | 28 (193) | 32 (220) |
| Hardness HBW | N.A. | 183 |
Delivery program
- Round extruded Ø 12.7 mm to 76.2 mm
- Round continuous casted Ø 25.4 mm to 228.6 mm
- Flat bars thickness 6.4 mm to 101.6 mm
- Further sizes available upon request.
