2.4816
Business Unit Manager Medical, Aerospace, Industry
Alloy 600 is a nickel-chrome-iron alloy which is characterized by:
- Good mechanical properties at low, room and elevated temperatures
- very good resistance to stress-corrosion cracking , even at elevated temperatures
- very good resistance to high-temperature corrosion in dry chlorine and hydrogen chloride
- Good resistance to oxidation, carburization and nitriding
Material Data Sheet
| Material Designation | 2.4816 |
|---|---|
| Alloy | Alloy 600 |
| EN Material Symbol | NiCr15Fe |
| UNS | N 06600 |
| Trademark | Nicrofer® 7216 |
| ISO | NiCr15Fe8 |
| VdTÜV Data Sheet | 305 |
Main fields of application of alloy 600
Alloy600 is versatile. Some Applications of Alloy 600 are:
- Furnace casing seals, fans and fittings - stable in furnace atmospheres
- vessels and heat exchanger tubes in the production of vinyl chloride
- components for the preparation of chlorinated and fluorinated hydrocarbons
- Tubes for pyrolysis-dichloroethylene – resistant to carburization, chlorine, hydrogen chloride and oxidation
- Production of caustic alkalis, particularly with existence of sulfur compounds
- In nuclear reactors for parts such as ducts for control rods, reactor vessels and seals, steam dryers and separators in boiling water reactors
- Transport rollers, nozzles and other fittings in industrial furnaces
- Metamorphosis from uranium oxide to tetrafluoride by hydrofluoric acid – stable against hydrofluoric acid
- Thermocouple Protection Tubes – resistant to carburizing and nitriding atmosphere
Chemical composition of alloy 600
| C | Si | Mn | P | S | Cr |
|---|---|---|---|---|---|
| 0.05-0.1 | 0.5 | 1.0 | 0.02 | 0.015 | 14.0-17.0 |
| Al | Ni | Ti | Cu | Fe |
|---|---|---|---|---|
| 0.3 | 72 | 0.3 | 0.5 | 6.0-10.0 |
Characteristics of alloy 600
| Temperature Range | Due to its higher creep rupture strength, Alloy 600 can also be used for temperatures above 700 ° C | | Density | 8.42 g/cm³ | | Melting Rage | 1370°C – 1425°C | | Elongation at break of Alloy 600 sheet at 20 ° C | 30 % | | ISO-V notch impact toughness at room temp. | across ≥ 150 J/cm², lengthwise ≥ 200 J/cm² | | Forgings | across ≥ 120 J/cm² |
Delivery program
Sheets / Plates mm: 2 - 15
Coils mm: 3
With short delivery time: plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.
